A kosár üres |
Delock GPIO Pin Header -> Serial RS-232 M/M adapter Raspberry Pi-hez
Cikkszám: 65628
Ár: 11 920 Ft
Description
This adapter by Delock enables you to connect a serial device via the 4 pin pin header connector (RX and TX) with the GPIO interface of your Raspberry Pi by using the included cable. Then configure your system according to the requirement.
Specification
• Connectors:
1 x Sub-D 9 pin male RS-232
1 x 4 pin pin header
• Supported baud rate up to 230 Kb/s
• Level shifter from RS-232 3.3 V to 5 V on Raspberry Pi
• Supported input voltage: 2.7 V ~ 5.25 V
• Dimensions (LxWxH): ca. 48 x 43 x 16 mm
• OS independent, no driver installation necessary
System requirements
• A free pin header connector
• USB connection cables
Package content
• Adapter
• Cable pin header 4 pin > 5 pin
Package
• White Box
This adapter by Delock enables you to connect a serial device via the 4 pin pin header connector (RX and TX) with the GPIO interface of your Raspberry Pi by using the included cable. Then configure your system according to the requirement.
Specification
• Connectors:
1 x Sub-D 9 pin male RS-232
1 x 4 pin pin header
• Supported baud rate up to 230 Kb/s
• Level shifter from RS-232 3.3 V to 5 V on Raspberry Pi
• Supported input voltage: 2.7 V ~ 5.25 V
• Dimensions (LxWxH): ca. 48 x 43 x 16 mm
• OS independent, no driver installation necessary
System requirements
• A free pin header connector
• USB connection cables
Package content
• Adapter
• Cable pin header 4 pin > 5 pin
Package
• White Box
Gyártó | Delock |
bemeneti csatlakozó | GPIO Pin Header |
cikknév kiegészítés | Raspberry Pi-hez |
csatlakozó típus | M/M |
irány | -> |
kimeneti csatlakozó | Serial RS-232 |
Értékelések
Ezt a terméket még senki sem értékelte!
Termék értékelése
Értékeléshez jelentkezzen be.